Configuring wireless using a temporary usb cable – Dell P703w All In One Photo Printer User Manual
Page 15
![background image](/manuals/619885/15/background.png)
If you are using Hex characters, valid keys are 64 characters long.
If you are using ASCII, valid keys are at least 8 characters long.
The wireless network may use anywhere from one to four WEP keys. A WEP key is like a password and must meet the
following criteria:
If you are using Hex characters, valid keys are either 10 or 26 characters long.
If you are using ASCII, valid keys are either 5 or 13 characters long.
Configuring Wireless Using a Temporary USB Cable
1. Plug the printer power cable into the wall outlet.
2. Press the Power button
.
At your printer's Operator Panel:
3. Press the Menu button
.
4. Press the down Arrow button
to scroll to Network.
5. Press the Select button
.
6. Press the down Arrow button
to scroll to WiFi Radio.
7. Press the left or right Arrow button
to set the parameter value to on.
8. Press the Select button
.
At your computer:
9. If you are using your printer with an existing computer: Go to step 10.
If you are using your printer with a new Dell computer: Go to step 11.
10. Ensure that your computer is on, and then insert the Drivers and Utilities CD. The CD launches automatically.
NOTE:
If you do not have your Drivers and Utilities CD, you can download the appropriate software from
11. Connect the USB cable between the port on the back of the printer and the computer.
12. Follow the on-screen instructions until you reach the below screen. By default the USB connection option is
selected.