Canon MP800R User Manual

Page 85

Chapter 5

Printing Photographs Directly from a Compliant Device

Printing Directly from a Digital Camera or a Digital Video Camcorder

This section describes how to print after connecting a camera to the machine.

Display the image you want to print in replay mode.

z If the camera will not change to replay mode, refer to the manual supplied with your digital

camera for instructions how to.

z When the digital camera is correctly connected, the icon

will display on the LCD of the

digital camera.

Press [SET] on the digital camera.

The print setting menu is displayed on the LCD of the digital camera.

Select [Style] and specify the paper size, bordered or borderless printing, and date
printing ON or OFF.

Specify the number of copies, select [Print], and then press [SET] on the digital
camera.

Note

z For the digital camera operation method and troubleshooting, refer to your digital camera

manual.

z For print error messages, see

“Cannot Print Properly from the Digital Camera” on

page 143

Note

z By operating the digital camera, you can make the following prints:

– You can make a standard print from the image displayed in the single display mode or in

the index display mode.

– You can print specified numbers of images, or make an index print by editing the DPOF.

* Images other than Exif may not be index printed.

– For the images taken with an ExifPrint compatible digital camera, the ExifPrint function

can be used.

– If date printing is set from the digital camera, the date when the photograph was taken is

to be printed (excluding the index print).

– Images will be scaled automatically according to the image size set on the digital camera

and the size of the media set on the machine.

z The digital camera does not support the following functions:

– Print quality setting
– Machine maintenance

z To disconnect the USB cable connecting the digital camera to the machine, follow the

procedure below:

1. Disconnect the USB cable from the machine.

2. Turn OFF the digital camera.

3. Disconnect the USB cable from the digital camera.

When disconnecting the USB cable, be sure to hold the connector by its sides.