beautypg.com

Appendix, Printing area, Chapter 13 – Canon MP800R User Manual

Page 166

background image

Chapter 13

164

Chapter 13

Appendix

Appendix

Printing Area

To ensure the best print quality, the machine allows a margin along each edge of media. The actual
printable area will be the area without these margins. By selecting Borderless Printing*, printing with
no margins is possible.
* This is available in A4, Letter, 4" x 6" /101.6 x 152.4 mm, 4" x 8" /101.6 x 203.2 mm, 5" x 7" / 127.0
x 177.8 mm, and 2.13" x 3.39" / 54.0 x 86.0 mm sizes of paper. If you are making borderless copies
in Copy mode or borderless prints in Photo/Film mode, you can adjust the amount of image that
extends off the paper by setting under .

„ A5, A4, B5, 4" x 6", 4" x 8", 5" x 7", 2.13" x 3.39"

Note

z In duplex printing, the printable area at the top of the page is 2 mm / 0.08 inches narrower than

the usual area.

z If you print fully on the printable area outside of the recommended printing area, print quality or

paper feeding accuracy may go down.

Size

Printable Area (width x height)

A5

141.2 x 202.0 mm / 5.6 x 7.9 inches

A4

203.2 x 289.0 mm / 8.0 x 11.4 inches

B5

175.2 x 249.0 mm / 6.9 x 9.8 inches

5" x 7" / 127.0 x 177.8 mm

120.2 x 169.8 mm / 4.7 x 6.7 inches

4" x 6" / 101.6 x 152.4 mm

94.8 x 144.4 mm / 3.7 x 5.7 inches

4" x 8" / 101.6 x 203.2 mm

94.8 x 195.2 mm / 3.7 x 7.8 inches

2.13" x 3.39" / 54.0 x 86.0 mm

47.2 x 78.0 mm / 1.86 x 3.07 inches

Note

When Printing on Photo Paper Pro PR-101, Glossy Photo Paper GP-401, Glossy Photo
Paper “Everyday Use” GP-501, Photo Paper Plus Glossy PP-101, Photo Paper Plus Double
Sided PP-101D, Photo Paper Plus Semi-gloss SG-101 and Matte Photo Paper MP-101,
selection of “Borderless Printing” enables you to make prints with no margins.

However, Borderless Printing may reduce the print quality on the top and bottom edges of the
paper or cause it to become smudged.

Printable area

Recommended printing area

39.5 mm/1.58 in

36.5 mm/1.46 in

5.0 mm/0.2 in

3.0 mm/0.12 in

3.4 mm/0.13 in

3.4 mm/0.13 in