Canon MP800R - Manual (Page 42)

Chapter 2
40 Chapter 2 Copying
Copying
Making Copies
This section describes the basic procedure to make copies.
1
Prepare for copying.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18 .
(2) Press [COPY].
(3) Load paper.
See “Loading Paper” on page 20 .
(4) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 24 .
(5) Load the document on the Platen Glass.
2
Start copying.
(1) Check the page size and media type.
(2) Use [ ] or [ ] to specify the number of copies.
The following information is displayed as well.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the
Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
Note
For information on the types and conditions of documents which you can copy, see “Loading
Documents” on page 19 .
Note
Press [Settings] to check or change the page size, media type, or other settings. See “To
Change Print Settings” on page 35 .
Intensity: Pressing [ ] decreases the intensity, and pressing [ ] increases the
intensity.
You can also use the auto intensity. See “Print Setting Items” on page 37 .
(1)
(2)