Removing and replacing parts, Recommended tools, System orientation – Dell PowerEdge 2650 User Manual
Page 27
Back to Contents Page
Removing and Replacing Parts
Dell™ PowerEdge™ 2650 Systems Service Manual
The procedures in this guide require that you remove the cover and work inside the system. While working inside the system, do not attempt to service the
system except as explained in this manual and elsewhere in your system documentation. Always follow the instructions closely. Review all of the procedures in
your System Information document.
This section provides servicing procedures for components inside the system. Before you start any of the procedures in this section, perform the following
tasks:
l
Perform the procedures described in "
External Visual Inspection
."
When there is no replacement procedure provided, use the removal procedure in reverse order to install the replacement part.
Recommended Tools
You need the following items to perform the procedures in this section:
l
Key to the system keylock
l
#2 Phillips screwdriver
l
Wrist grounding strap
System Orientation
The illustrations in this document are based on the positioning of the system as shown in
Figure 4-1. System Orientation
SCSI Configuration Information
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See
your System Information document for complete safety information.
Read the safety information in the System Information document.