Dell Inspiron 630m - Manual (Page 52)

52 Wireless Mini PCI Card
Replacing the Mini PCI Card
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7
2 Follow the instructions in "Removing the Mini PCI Card" on page 49, as applicable.
NOTICE: To avoid damaging the Mini PCI card, make sure the antenna cables are not under the card when you
secure the card into place.
NOTICE: The edge connector is keyed to ensure correct insertion. If you feel resistance, check the connector and
realign the card.
3 Install the new Mini PCI card:
a Align the notch in the Mini PCI card edge connector with the tab in the connector slot.
b Slide the Mini PCI card firmly into the slot at a 45-degree angle, and then rotate the card down
until it clicks into place. If you do not feel the click, remove the card and reinstall it.
1 Mini PCI card
1