Dell Intel PRO Family of Adapters - Manual (Page 9)

Back to Contents Page
Installation and Setup: Intel® FCoE/DCB User Guide
This section provides information for installing and setting up Intel® FCoE components. Follow the detailed instructions in
Microsoft* Windows Setup or Linux Setup .
Installing Firmware
In order to enable FCoE Boot, the firmware should be loaded as Option ROM while booting the BIOS in the system. "Intel(R)
Ethernet FCoE Remote Boot"
followed by the firmware version number is displayed, if the firmware is installed correctly.
NOTE: If you are updating firmware from version 13.x, you must first update to version 14.0.12 before updating to
firmware version 14.5.x or later.
See instructions on installing firmware.
Please read all restrictions and disclaimers .
Back to Contents Page