Dell B2375dfw Mono Multifunction Printer - Manual (Page 327)

Condition Suggested solutions
Paper does not feed • Remove any obstructions from inside the printer. See
into the printer. "Cleaning the Interior".
• Paper has not been loaded correctly. Remove paper from the
tray and reload it correctly.
• There is too much paper in the paper tray. Remove excess
paper from the tray.
• The paper is too thick. Use only paper that meets the
specifications required by the printer. See "Identifying Print
Media Sources and Specifications".
The paper keeps • Ensure that the correct paper size is selected. See "Setting the
jamming. Paper Size".
• An incorrect type of paper is being used. Use only paper that
meets the specifications required by the printer. See
"Identifying Print Media Sources and Specifications".
• There may be debris inside the printer. Open the front cover
and remove the debris.
Transparencies stick
together in the paper
exit. Use only the transparencies specifically designed for a laser
printer. Remove each transparency as it exits from the printer.
Envelopes skew or fail
to feed correctly. Ensure that the paper guides are against both sides of the
envelopes.
- 326 ­