Dell B2375dfw Mono Multifunction Printer - Manual (Page 120)

SNMPv3
See "SNMPv3".
IP Security
You can set to enable or disable IPSec connection. Also you can check IPSec status.
IP/MAC Filtering
You can set filtering options for IP and MAC addresses. If the administrator does not add a
filtering rule for IPv4, IPv6, and MAC addresses, nothing is filtered. If the administrator has
added a filtering rule, filtering will be applied to the entered IPv4, IPv6, and MAC addresses.
IPv4 Filtering
You can enable/disable IPv4 filtering as well as manage filtering rules.
IPv6 Filtering
You can enable/disable IPv6 filtering as well as manage filtering rules.
MAC Filtering
You can enable/disable Mac filtering as well as manage filtering rules.
802.1x
You can enable/disable 802.1x Security.See"802.1x"
External Authentication Server
Set the servers for authentication.
Kerberos Sever
You can set Kerberos server settings.
Adding a Kerberos server
1 From the Embedded Web Service, select the Security tab Network Security
External Authentication Server Kerberos Server.
2 Click the Add button.
A pop-up window appears.
3 Enter the necessary information.
• Required Information
– Realm : Enter the default realm.
– Server Address : Enter the default server address.
– Port Number : Enter the default port number. 88 is set as a default value.
– Make to Default Server : Check to set the server as the default server.
• Additional Information
- 119 ­