Dell B2375dfw Mono Multifunction Printer - Manual (Page 110)

SNMP
You can set SNMP related settings.
SNMPv1/v2
You can set SNMPv1/v2 settings.
• General
– SNMPv1/v2 Protocol : Check to enable SNMPv1/v2 protocol.
• Community Name :
– Adding the SNMP Community
a From the Embedded Web Service, select the Settings tab Network Settings
SNMP SNMPv1/v2 Community Name.
b Click the Add button.
A pop-up window appears.
c Enter the necessary information.
d Click Apply.
– Deleting the SNMP Community
a From the Embedded Web Service, select the Settings tab Network Settings
SNMP SNMPv1/v2 Community Name.
b Check the checkbox of the name(s) you want to delete from the list and click the
Delete button above the list.
c A confirmation window appears. Click on Yes.
– Editing the SNMP Community
a From the Embedded Web Service, select the Settings tab Network Settings
SNMP SNMPv1/v2 Community Name.
b Check the checkbox of the name) you want to edit from the list and click the Edit
button above the list.
c Change the necessary information.
d Click Apply.
• SNMP Traps :
– Adding the SNMP traps
a From the Embedded Web Service, select the Settings tab Network Settings
SNMP SNMPv1/v2 SNMP Traps.
b Click the Add button.
A pop-up window appears.
c Enter the necessary information.
d Click Apply.
- 109 ­