Midroli film rewind, Open the camera back remove the film – Canon eos rebel g User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Midroli Film Rewind
To rewind and unload the film before reaching the last frame, follow the
steps below.
Press and hold down the film
rewind button (self-timer button) for
at least 1 second.
• The film will start rewinding. When the film
rewind ends, there will be a shutter-
release sound and the film symbol {@) on
the LCD panel will blink. After about 3
seconds, the film symbol will stop blinking
and just stay on.
Open the camera back
remove the film.
If the film is removed from the camera in midroll without being rewound and then a new roll of
fitm is loaded, the new roll (film leader) will only be rewound into the film cartridge. To prevent
this, close the camera back and press the shutter button completely before loading a new roil
of film.
■ &
51