A check the shutter speed and take ** the picture, Iv. advanced operations, Check the shutter speed and take ** the picture – Canon eos rebel g User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV. Advanced Operations
• The shutter speed and aperture will be
displayed in the viewfinder and on the LCD
panel.
Q Press the shutter button halfway to
focus the subject.
I "7 I"
■L 0
A
Check the shutter speed and take
** the picture.
■ If the 30" shutter speed blinks, the scene is too dark. In such a case, turn the Main Dial to
set a larger aperture {smaller f-number) until the shutter speed stops blinking.
inn
ij
nr i i
II L'
■.
■_! L
1
J
“2.1 if, 1 i£
+
i
11 the 2000 shutter speed blinks, the scene is too bright. In such a case, turn the Main Dial
to set a smaller aperture {a larger f-number) until the shutter speed stops blinking.
3 n n r
i
i k i i
Aperture Display
The aperture can be set and displayed in full and half stops as shown below. The higher the
aperture setting (f-number), the smaller the aperture opening will be. The displayable range of
aperture settings depends on the lens mounted on the camera. When no lens is mounted on
the camera,
(<
00” is displayed for the aperture setting,
1.0
1-2
1-4
1.8
2.0
2.5
2.8
3.5
4.0
4.5
5.6
6.7
8.0
9.5
11
13
16
19
22
27
32
38
45
54
64
36