Canon eos rebel g - Manual (Page 45)

IV. Advanced Operations
-4$
“2,1.0.1.2 + * Bracketing amount of
1 1 1 1 stop
“2.1.G.1*2* * Bracketing amount of
1 • * -1 stop
"2.1.GM.2+
■l l
Bracketing amount of
-1.5 stop
-2.1.0.1.2+
■ ■
Bracketing amount of
-2 stops
If the set bracketing amount exceeds 2
stops, the display will be as shown on
the left. Autoexposure bracketing and
the bracketing amount will still work
properly.
A Turn the Main Dial or wait for 4
^ seconds until the bracketing
amount takes effect.
C Take the bracketed shots with the
** film advance mode set with the
current picture-taking mode. See
“Feature Availability Table” on
page 61.
• The exposure level scale in the viewfinder
and on the LCD panel will show the
bracketing amount for each bracketed
shot.
* The AEB symbol’s function setting pointer
and dot will blink while the bracketed
pictures are taken.
Correct exposure
Underexposure .
Overexposure ...
*2.1 if1112 +
I
-2.1.*.1.2+
I
"2.1if.1.2 +
I
• If the Command Dial is set to a Programmed Image Control mode or if the built-in flash or a
Canon Speedlite is used, the autoexposure bracketing setting will be canceled.
• The three bracketed shots can be taken continuously by holding down the shutter button in
the continuous shooting mode. However, the bracketed amount for each shot will not be
displayed in the viewfinder.
• If the self-timer is used with autoexposure bracketing, the three bracketed shots will be
taken continuously 10 sec. after the self-timer is activated.
45