Check the aperture and take the picture – Canon eos rebel g User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV. Advanced Operations
* The shutter speed and aperture will be
displayed in the viewfinder and on the LCD
panel.
Q Press the shutter button halfway to
^ focus the subject.
r n
r c r ■ n " 2 . 1 . * » 1
*2+i
Qu
j. C' L
1
J |
'
Check the aperture and take the
picture.
* If the maximum aperture (the smallest Fnumber) blinks, the scene is too dark. In such a
case, turn the Main Dial to set a slower shutter speed until the aperture stops blinking.
■ If the minimum aperture (the largest f-number) blinks, the scene is too bright. In such a
case, turn the Main Dial to set a faster shutter speed until the aperture stops blinking.
Shutter Speed Display
The shutter speed can be set and displayed in full and half steps as shown below. Shutter
speeds from 2 to 2000 indicate the denominator of the fractional shutter speed. For example,
125 is 1/125 second. For slower shutter speeds, the numeral is appended with the seconds
mark (“). For example, 0"7 is 0,7 second and 15” is 15 seconds.
30"
20”
15”
10”
8"
6”
4”
3”
2"
1”5
1”
0"7
2 3 4 6 8 10 15 20 30 45 60 90 125 180 250 350 500 750 1000 1500 2000
34