Canon eos rebel g - Manual (Page 14)

Loading and Unloading Film
Loading Film
When a roll of film is loaded, the camera first winds the whole roll onto the
camera’s spool. Then each time a picture is taken and the frame
advances, one frame of film is rewound back into the film cartridge.
With DX-coded film, the camera
automatically sets the film’s ISO
speed.
• If the film is not DX-coded, set the ISO speed
manually. See ^Setting the ISO Speed" on
page 49.
1 Unlock the Command Dial.
Slide down the camera back lock-
release lever to open the camera
back.
Insert the film cartridge at an angle
as shown in the figure.
Infrared film cannot be used with this camera. •
4%
w' •
.JThe shutter curtain is manufactured with very
w high precision. To prevent damage, never
touch the shutter curtain. When loading or
Unloading film, be careful not to touch the
shutter curtain with your fingers or the film.
4