Canon eos rebel g - Manual (Page 32)

IV* Advanced Operations
In a Creative Zone mode, the LCD panel and viewfinder wilt show the exposure level scale and
exposure level indicator in addition to the shutter speed and aperture. The exposure level indicator
indicates the exposure compensation amount and exposure level in the manual exposure mode.
Difference Between Program AE Mode and
Full Auto Mode
The Program AE (P) mode and Full Auto (CD) mode obtain the same
shutter speed and aperture settings for picture-taking. However, the
Program AE mode is more flexible by allowing you to override the
camera settings and use the features below.
O: Settable by the user, x: Not settable by the user.
Feature P Full Auto
Continuous shooting O X
Program shift o X
Exposure compensation o X
Autoexposure bracketing o X
Partial metering/AE lock 0 X
Manual focusing point selection O ””I X
Manual firing of built-in flash o X
High-speed sync with EX-series Speedlite ^ o X
FE lock with EX-series Speedlite o X
Shifting the Program
In the Program AE mode, you can freely change the shutter speed and
aperture combination (program) set by the camera while maintaining
the same exposure value. This is called shifting the program.
To shift the program, press the shutter button halfway and turn the
Main Dial until the desired shutter speed or aperture is displayed,
• After the picture is taken with the shifted program, the shifted program is canceled
automatically and the original program is restored.
■ If the built-in flash is used, the program cannot be shifted.
■ The program can be shifted only to a shutter speed from 30 to 1/2000 sec. and within
the minimum and maximum aperture settings of the lens.
32