9 info – Dynalco SWT-2000 Speed Switch/Speed Transmitter User Manual
Page 27
Operating Instructions SWT-2000
DYNALCO
23
6.8.2 Changing the Password
Go to
Changing the password involves entering the old password and the new password twice. To save the
password click on
The password is now stored in the configuration software.
To change it in the SWT-2000 the data must be downloaded
.
A Configuration user may change the Process user password by entering the Configuration user password
first. Factory set passwords:
Config User:
1981
Process User
1977
Attention:
If the password has been changed, there is no way of returning to a factory setup. If the password
is forgotten, the SWT-2000 will need to be returned to Dynalco to be reset.
6.9 Info
To gain information about the SWT-2000 or to enter a Process name
An individual Process name may be entered into the text field to the right of
characters. (Only alphanumeric characters).
Type:
Tachometer
type
number
Java version:
Java Version stored in the Tachometer
Firmware:
SWT-2000
Firmware
Version
Serial Nr:
SWT-2000’s serial no.
Cal. Date:
Calibration date
TCP/IP
Address:
SWT-2000’s
IP
Address
JRE Version:
PC’s JAVA Runtime