Humboldt H-4114SD.3F Electrical Density Gauge - Manual (Page 35)

Press the Perform Electrical Test button . Once this is done
the Gauge will perform a test and the next window will appear, telling
you to switch the Dart positions to the B and B position. The diagram on
the screen below illustrates the correct position of the darts to use.
Press the Perform Electrical Test button . The Gauge will
now perform a second test and the next window will appear.
This window shows the results of your test. To save your results, Press
the Save button . (You can also Press the Discard button , if
for some reason you don't want to save the results of the test)
32