Humboldt H-4114SD.3F Electrical Density Gauge - Manual (Page 24)

When you have completed this step,
DO NOT PRESS THE SAVE BUTTON.
Continue entering the Wet Density and Moisture values from your
traditional method tests into each of the corresponding Soil Tests you
have run with the EDG. From the Screen above, choose each point in
the Soil Tests list on the left and enter the Wet Density and Moisture
data for each Test in the same manner as you just did the first one.
Once you have completed entering the information for all your points.
Press the Save button . This will save all the entries you have made
for all Soil Tests and completes the Soil Model. Once you press the Save
button , you will see this Screen:
21