Media card reader – Dell OptiPlex 760 User Manual
Page 89
4.
Attach the power and data cables to the floppy drive and to the system board.
5.
Replace the computer cover (see
Replacing the Computer Cover
).
6.
Enter system setup (see
System Setup
), and use the Diskette Drive option to enable your new floppy drive.
7.
Verify that your computer works correctly by running the Dell Diagnostics (see
Dell Diagnostics
).
Media Card Reader
Removing the Media Card Reader
1.
Follow the procedures in
Working on Your Computer
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
1
floppy drive
2
shoulder screws (4)
3
shoulder screw slots (2)
1
power cable
2
data cable
3
floppy drive connector (DSKT)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.