Speakers, Removing a speaker, Installing a speaker – Dell OptiPlex 760 User Manual
Page 52
Back to Contents Page
Dell™ OptiPlex™ 760 Service Manual
Speakers
Removing a Speaker
1.
Follow the procedures in
Working on Your Computer
.
2.
Remove the cover of your computer (see
Removing the Computer Cover
).
3.
Disconnect the speaker cable from the INT_SPKR connector on the system board.
4.
Press the release tab and then slide the speaker down and away from the computer chassis.
5.
Replace the computer cover.
6.
Turn on power to the computer.
Installing a Speaker
1.
Follow the procedures in
Working on Your Computer
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1
speaker
2
release tab
3
speaker cable
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.