Bio-Rad SmartSpec Plus Spectrophotometer - Manual (Page 6)

Section 4
Introduction
4.1 Identification of System Components
Fig. 1. View of the SmartSpec Plus Spectrophotometer.
Instrument
1. Keypad interface
Change menu and select options by pressing these
buttons. Press a single button to perform action
described on the menu display.
2. Display 2 x 24 alphanumeric backlit LCD display. Displays
various menus and options available.
3. Sample compartment door Lift door to insert cuvette into the cuvette chamber.
4. Integrated thermal printer Built-in alphanumeric/graphic printer. Press print
button to record results immediately.
5. Printer paper compartment Remove door to install new roll of printer paper
door
Fig. 2. Rear view of the SmartSpec Plus Spectrophotometer.
6. Fan Guard Exhaust air leaves cabinet through this opening.
7. Universal Power Input Module Appropriate power cord is connected to the power
and ON/OFF Switch input module. Instrument power switch.
8. Serial Output Port RS-232 connection to serial printer or computer.
3
1
2 5
4
3
8
7
6