Bio-Rad SmartSpec Plus Spectrophotometer - Manual (Page 27)

• If you want to download the data, make sure the connections are made to the
computer and then press Enter. If you do not want to download the data, press
Cancel.
After the data are downloaded SmartSpec Plus will reset for the next kinetic data
collection. From the Ready screen, you can change any of the parameters for the kinetic
data collection.
E. OD600. Immediately after the absorbance data are collected, they are displayed
along with the cellular concentration.
• You can read a second sample by placing the cuvette in the chamber and pressing
Read Sample. You can also return to the Ready screen by pressing Enter.
Available options are Change next sample number and Change number of sample
replicates.
F. λλ. Immediately after data are collected they are displayed
• You can read a second sample by placing the cuvette in the chamber and pressing
Read Sample. You can also return to the Ready screen by pressing Enter.
Available options are Change next sample number and Change number of sample
replicates.
7. Print the data. You can print data as they are collected, but it is more efficient to print
absorbance and concentration data at the end of an assay. For assays other than Scan
and Kinetics, if you press Print, the display will show
• Press 3 to print the full report which includes the absorbances and concentrations
(if available) for each sample in the current assay.
• Press 1 to print all data collected since the last time you printed.
• press 2 to print only one sample
24
1.Print unprinted Samp #s
2.Select # 3. Full Report
Enter Sample # ______ to
print sample report.
Ready to Read Absorbance
<=Exit Assay >=Options
Ready to Read Absorbance
<=Exit Assay >=Options
A480=x.xxx A580=x.xxx
A680=x.xxx Samp #1
OD600 = x.xxx
Conc = xxxe xxx cell/ml
Ready to Read Absorbance
<=Exit Assay >=Options