Baseline Systems Ethernet Radio - Manual (Page 28)

Ethernet Radio Configuration Guide
Page 22 Section 3 – Using the Configuration Web Server
5. Click Internet Protocol (TCP/IP) to highlight it, and then click Properties to display the
Internet Protocol (TCP/IP) Properties window.
IMPORTANT NOTE! Take note of the current settings so you can return the computer to
those settings when you have finished configuring the Ethernet radios.
6. Click the Use the following IP address radio button. The default IP addresses for Baseline’s
Ethernet radios starts at 192.168.111.100. In the first 3 cells of the IP address field, type
192.168.111 and in the last cell, type a number that is outside the range of the default IP
addresses that are assigned to your Ethernet radios. For example, if you have 4 radios, they
would be assigned IP addresses ending in 100 - 104, so you can use 192.168.111.105 as the IP
address for your computer.
7. Press and Windows XP automatically enters the Subnet Mask of 255.255.255.0.
8. Press to move to the Default Gateway field. Type 192.168.111.1
9. Click OK to save your changes, and then click Close to close the Local Area Connection
Properties window.