Great Plains NTA2000D Operator Manual - Manual (Page 79)

59 9/13/2006 NTA 2000D 148-632M
Great Plains Mfg., Inc.
Hose Connection and Routing
1. Assemble the seed hoses from the seed
box to the openers. Route each hose from
the center of the box to the end opener. Fol-
low the same manner of routing until the
end, in which the hose from the outside
opening of the seed box will be routed to
the center opener. Use the hose brackets
in routing the hoses from the seed box to
the openers to keep hose up off the drill.
Note: Using the charts on the right, select the
proper row spacing for your drill to determine
the correct hose to use in each position.
Note: When all of the meter outlets are not used
(i.e: 7 1/2”) it is best to leave the outside meters
open.
150mm Spacing
(6 in)
Row
Number
Hose
Length
(inches)
1 96
2 96
3 96
4 96
5 96
6 115
7 115
8 115
9 115
10 120
11 128
12 128
13 128
14 138
15 138
16 146
17 146
18 156
19 166
20 176
Hose Attachment Route
167mm Spacing
(6 1/2 in)
Row
Number
Hose
Length
(inches)
1 96
2 96
3 96
4 96
5 115
6 115
7 115
8 115
9 120
10 128
11 128
12 138
13 138
14 146
15 146
16 156
17 166
18 176
187mm Spacing
(7 3/8 and 7 1/2 in)
Row
Number
Hose
Length
(inches)
1 96
2 96
3 96
4 96
5 115
6 115
7 115
8 120
9 128
10 128
11 138
12 146
13 146
14 156
15 166
16 176