Great Plains NTA2000D Operator Manual - Manual (Page 26)

24 NTA 2000D 148-632M 9/13/2006
Great Plains Mfg., Inc.
Figure 19
Lock Channel
Figure 20
Lock Channel
Figure 21
Valve
Unfolding the Drill
!
WARNING!
Pinch Point and Crushing Hazard. To prevent serious injury or
death. Be certain the drill is hitched securely to your tractor
drawbar and the hitch safety chain is securely attached to the
tractor before raising or unfolding the drill.
• Unfold the wings with the drill raised.
• Fold only if hydraulics are bled free of air and fully charged
with hydraulic oil.
• Keep away and keep others away when folding or unfolding
drill
Refer to Figure 19 and 20
1. After the drill has been unfolded remove the lock
channels from the tongue cylinder and the gauge
wheel cylinders. Slowly lower drill and place lock
channels in their storage positions.
Refer to Figure 21
2. Turn selector valve handle to the left for fan position.
Fan
19732
19878
19733