Great Plains NTA2000D Operator Manual - Manual (Page 22)

20 NTA 2000D 148-632M 9/13/2006
Great Plains Mfg., Inc.
Folding the Drill
!
WARNING!
Pinch Point and Crushing Hazard. To prevent serious injury or
death. Be certain the drill is hitched securely to your tractor
drawbar and the hitch safety chain is securely attached to the
tractor before raising or folding the drill.
• Always lift drill when before folding.
• Fold only if hydraulics are bled free of air and fully charged
with hydraulic oil.
• Keep away and keep others away when folding or unfolding
drill.
Markers
Note: If maker option is installed, markers must be folded
before coulter wings can be folded.
Refer to Figure 8
5. Before folding markers remove cylinder lock channels
from cylinders and place in storage positions. Failure
to do so will not allow the markers to travel to their
transport positions.
Refer to Figure 9
6. Fold markers to their transport positions. The second
marker section should rest on top of drill frame main
tube.
:
Opener Wing Frame
Refer to Figure 10
7. Turn opener wing frame lock handles down to unlock
opener wing frames.
19734
19877
Figure 9
Marker, Transport Position
Figure 10
Opener Wing Frame Lock
19894
Figure 8
Marker Cylinder Lock Channel