Great Plains P18140C Operator Manual - Manual (Page 40)

8-10m Press Range
Operating Instructions
40
Measures in case of injury
through oil
Eyes:
Should any oil be splashed into your eyes,
rinse with water for 15 minutes. If the eye is
still irritated, contact a doctor immediately
If oil is swallowed
If oil is swallowed, it is important not to induce
vomiting. Contact a doctor immediately.
Skin irritation caused by oil
In case of prolonged skin contact, wash off
the oil with soap and water.
Oil Spills
Use either sand or a suitable granular
absorbent to soak up any spilt oil. Dispose
of the oil-contaminated absorbent in the
proper manner.
Oil Fires
Never use water to extinguish an oil fire.
The oil will float on the water causing the
fire to spread.
Burning oil/lubricant must be extinguished
using a carbon dioxide powder or foam
extinguisher. Always wear respiratory
equipment when dealing with fires of this
type.
Waste Oil Disposal
Oil-contaminated waste and used oil must
be disposed of in accordance with current
legislation.
Waste oil must be collected and disposed of
in accordance with local regulations. Never
pour used oil into unsealed sewage systems
or drains or onto the ground.
5.16 Lubricants &
Hydraulic Oil
Hydraulic System
The hydraulic fluid from the tractor is mixed
with the hydraulic fluid from the machine.
The supplied machine hydraulic system
contains Total AZOLLA ZS 32 oil.
Lubricants
Simba Great Plains strongly recommend
the use of Lithium Complex EP2 Grease
in the disc of your X-Press. This grease
is a Lithium Complex soap dispersed in a
mineral oil and is interpreted by IARC as
being non-carcinogenic. Grease cartridges
are available from Simba Great Plains
(P12710). Using this grease in combination
with the labyrinth type seal it is permissible
to lengthen the greasing interval on the
disc hubs to 200 hours. If using a standard
agricultural grease the disc hubs should be
lubricated every 50 hours.
All other lubricating points on the machine
can be lubricated with multigrade lubricating
grease as specified in DIN 51825 KP/2K -
40.
Advantages of Lithium Complex EP2
Grease
 Excellent mechanical stability.
 Excellent load carrying properties.
 Wide temperature range.
 Excellent oxidation stability.
 Excellent water resistance.
 Compatibility with other greases.
5. Servicing and Maintenance