Great Plains 2S-2600HDF Operator Manual v2 - Manual (Page 20)

16 2S-2600HD Table of Contents Index Great Plains Manufacturing, Inc.
195-069M Table of Contents Index 2014-02-03
Electrical Connections
Refer to Figure 7
Plug drill electrical lead into tractor seven-pin connector.
If your tractor is not equipped with a seven-pin connector,
contact your dealer for installation.
Refer to Figure 8
If the drill is equipped with the optional shaft monitor,
mate the connector for the cab display.
See “Shaft Monitor” on page 100 for ordering informa-
tion.
Refer to Figure 9
If the drill is equipped with the point row option, mate the
connector for the cab control.
See “Point Row Clutch” on page 100 for ordering infor-
mation.
Figure 7
Lighting Connector
26467
Figure 8
Shaft Monitor Connector
34221
Figure 9
Point-Row Connector
26469