Great Plains 2S-2600HDF Operator Manual v2 - Manual (Page 10)

6 2S-2600HD Table of Contents Index Great Plains Manufacturing, Inc.
195-069M Table of Contents Index 2014-02-03
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
Right end panel of left main seed box;
1 total
838-266C
Red Reflectors
On wing walkboard inside end faces
(outside rear corners in transport);
2 total
26445
26445