Great Plains PM400 Monitor Operator - Manual (Page 16)

OPERATOR’S MANUAL
PM300, PM332, PM400 Planter Monitors
11001-1372-200606
10 / QUICK START GUIDE
2. Press Enter to modify the number of rows as shown in Figure 4. Use
the Right and Left Arrow keys to select the digit to change. Use the
Up and Down Arrow keys to edit the selected digit. Use the Up Arrow
key to increase the value; use the Down Arrow key to decrease the
value.
3. Press the Enter key to confirm the selection. Enter the row spacing in
the same manner.
4. Once the new values are entered, select either the Escape or Operate
key to return to the Operate (main) screen.
Figure 4
Number of Rows Screen
ROW SPACING
To change row spacing:
1. Press Planter Setup key.
2. Use the Down arrow to highlight the row spacing field (refer to Figure
5).
3. Press Enter to select the field.
4. Use the Left and Right Arrow keys to select a digit for editing.
5. When a digit is highlighted, use the Up and Down Arrow keys to edit
the value displayed. Use the Up Arrow key to increase the value; use
the Down Arrow key to decrease the value.
6. When the field shows the correct planter row spacing, press Enter to
confirm the selection.
7. Once the new values are entered, select either the Escape or Operate
key to return to the Operate (main) screen.
ENTER
OPERATE
ESCAPE
123 #
15.0
in
15.00
ft
I/O
N U M B E R O F R O W S
12
1 2 3 5 6 4
Enter
Up and Down Arrow keys
Escape key
Operate key
Left and Right Arrow keys