SARGENT Passport 1000 PG Cylindrical Locks - Manual (Page 13)

10/31/12
A7808B 13
Copyright © 2012, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
Passport 1000 PG Cylindrical Lock
16 - Installation of Inside Escutcheon
1. Position inside escutcheon (Fig. 16A).
2. Insert screws, top and bottom, and tighten
securely.
DO NOT OVERTIGHTEN.
NOTE: All wires should be placed inside to avoid
being pinched.
3. Straighten escutcheon and tighten securely.
15 - Battery/Battery Pack Installation
1. Place (6) “AA” batteries into the compartment being careful to align
polarity (- & +) properly.
2. Insert battery pack and click into place, making sure polarity terminals
on the battery pack are oriented upwards (Fig. 15A).
Fig. 15A
Fig. 16A
(2) # 8-32 x 1/2”
pan head torx
machine screws
SARGENT mortise lock with and without deadbolt:
PERSONA PG Controller DIP switch settings (Fig. 15A)
ON
OFF
ON
OFF
• Switch 1 and 2 - OFF
• Switch 3 - ON
SARGENT cylindrical locks or exit devices:
• Switch 1 - OFF
• Switch 2 and 3 - ON
Battery
pack