Tweco 6045 Excel Arc - Manual (Page 21)

INSTALLATION EXCEL ARC 6045
August 26, 2011 3-1 Manual 0-5213
SECTION 3:
INSTALLATION
3.01 Location
Be sure to locate the welder according to the following guidelines:
• Ambient temperature between 0 degrees C to 40 degrees C.
• In areas, free from oil, steam and corrosive gases.
• In areas, not subjected to abnormal vibration or shock.
• In areas, not exposed to direct sunlight or rain.
• Place at a distance of 12" (304.79 mm) or more from walls or similar boundaries that could restrict natural
airfl ow for cooling.
!
WARNING
Thermal Arc advises that this equipment be electrically connected by a qualifi ed electrician.
3.02 Electrical Input Connections
!
WARNING
ELECTRIC SHOCK can kill; SIGNIFICANT DC VOLTAGE is present after removal of input power.
DO NOT TOUCH live electrical parts.
SHUT DOWN welding power source, disconnect input power employing lockout/tagging procedures. Lockout/tagging
procedures consist of padlocking line disconnect switch in open position, removing fuses from fuse box, or shutting
OFF and red-tagging circuit breaker or other disconnecting device.