tekmar 162 Setpoint Control User Manuals - Manual (Page 6)

© 2007 U 162 - 08/07 6 of 12
Floor Heating Operation
View the Floor Temperature
The measured floor temperature is shown in the View
menu.
1. Press the Item button until the floor temperature is
located.
View the Set Floor Temperature
The desired floor temperature is shown in the View
menu.
1. Press the Item button until the set floor temperature is
located.
View the Outdoor Temperature
The outdoor temperature can be shown when the setpoint
control is connected to a tN4 system.
1. Press the Item button until the outdoor temperature is
located.
Adjust the Set Floor Temperature
The desired floor temperature can be changed while in
the Adjust menu.
When using a schedule, occupied and unoccupied
temperatures can be set.
In addition, when scenes are active, an away temperature
can be set.
Important: The setpoint control does not heat the floor
when the temperature is set to OFF. The OFF setting is not
recommended if the floor has the potential to freeze.
1. Press the Menu button to enter the Adjust menu.
2. Press the Up or Down button to change the Set Floor
(Occupied) temperature.
3. Press the Item button to locate the Set Floor Unoccupied
temperature if necessary. Press the Up or Down button
to change the Set Floor Unoccupied temperature.
4. Press the Item button to locate the Set Floor Away
temperature if necessary. Press the Up or Down button
to change the Set Floor Away temperature.