tekmar 162 Setpoint Control User Manuals - Manual (Page 11)

11 of 12 © 2007 U 162 - 08/07
The installer of this setpoint control may have already entered
a schedule. Please refer to Job Record J 162.
To set the schedule:
1. Use the Menu button to select the Schedule menu.
2. Use the Up or Down button to set the start time of the
event.
• • If you wish to skip the event, select “– –:– –” as the time.
“– –:– –” is found between 11:50 PM and 12:00 AM.
3. Use the Item button to advance to the next available
event.
4. Repeat steps 2 and 3 for all of the available events.
Setting the Schedule
Schedule
Mode
Event 24
h
r
Sat Sun Mon Tu
e
We Thu Fr
i
4 events
per day
Occupied 1
Unoccupied 1
Occupied 2
Unoccupied 2
or
2 events
per day
Occupied
Unoccupied
Temperature Units
or
The temperature can be displayed in either Fahrenheit (°F)
or in Celsius (°C).
To change the units of temperature:
1. Use the Menu button to select the Misc menu.
2. Use the Item button until the units flash.
3. Use the Up or Down button to select Fahrenheit (°F) or
Celsius (°C).
Cleaning the Setpoint Control
Clean the Setpoint Control’s exterior using a damp cloth. Moisten the cloth with water and wring out prior to wiping the
control. Do not use solvents or cleaning solutions.
Error Messages
Warning Symbol
When the Setpoint control encounters a problem, a Warning
Symbol appears. To troubleshoot how to correct the error,
please refer to the Data Brochure or contact a qualified
installer.
An electronic version of the Data Brochure D 162 is available
on the tekmar website: www.tekmarcontrols.com.