tekmar 162 Setpoint Control User Manuals - Manual (Page 2)

© 2007 U 162 - 08/07 2 of 12
Display
Symbols Description
The control uses a Liquid Crystal Display (LCD) as the
method of supplying information on the operation of the
Setpoint Control.
Access Levels
This setpoint control has five access levels:
•
• ADV (Advanced)
•
• INST (Installer)
•
• USER (User)
•
• LTD (Limited)
•
• SEC (Secure)
This brochure only covers the features available in the SEC,
LTD and USER levels. Only qualified service people should
adjust the INST and ADV access levels.
User Interface
• • View
•
• Adjust
•
• Time
• • Scene
•
• Schedule
•
• Miscellaneous
These menus are listed in the Menu Field on the top left
hand side of the display.
Use the Menu button to advance to the next menu.
Item
Each menu has several items. The abbreviated name of
the selected item will be displayed in the item field of the
display. To view the next available item, press and release
the Item button.
Item Field
Displays an abbreviated
name of the selected item
Number Field
Displays the current value
of the selected item
Status Field
Displays the current
status of the control’s
inputs, outputs and op-
Menu Field
Displays the
current menu
Menu
All of the items displayed by the setpoint control are
organized into six menus:
MODE OF OPERATION
Displays whether the device is in heating,
cooling or off mode.
RELAY 1
Displays when relay contact 1 is closed.
RELAY 2
Displays when relay contact 2 is closed.
WARNING
An error is present.
SCHEDULE MASTER
Indicates that the control is a schedule
master.
tN4 COMMUNICATION
A tN4 network is detected.
LOCK
The Access Levels are locked or a menu
option is visible but not adjustable.
OCCUPIED
Displays when operating at the occupied
temperature.
UNOCCUPIED
Displays when operating at the unoccupied
setback temperature.
OCCUPIED TIME
Displays when operating temporarily at
the occupied temperature due to a remote
enable or manual enable.