tekmar 162 Setpoint Control User Manuals - Manual (Page 5)

5 of 12 © 2007 U 162 - 08/07
Domestic Hot Water Tank Operation
View the DHW Tank Temperature
The measured DHW tank temperature is shown in the
View menu.
1. Press the Item button until the DHW tank temperature
is located.
View the Set DHW Tank Temperature
The desired DHW tank temperature is shown in the View
menu.
1. Press the Item button until the set DHW tank temperature
is located.
View the Outdoor Temperature
The outdoor temperature can be shown when the setpoint
control is connected to a tN4 system.
1. Press the Item button until the outdoor temperature is
located.
Adjust the Set DHW Tank Temperature
The desired DHW tank temperature can be changed while
in the Adjust menu.
When using a schedule, occupied and unoccupied
temperatures can be set.
In addition, when scenes are active, an away temperature
can be set.
Important: The setpoint control does not heat the DHW
tank when the temperature is set to OFF. The OFF setting
is not recommended if the DHW tank has the potential to
freeze.
1. Press the Menu button to enter the Adjust menu.
2. Press the Up or Down button to change the Set DHW
tank (Occupied) temperature.
3. Press the Item button to locate the Set DHW tank
Unoccupied temperature if necessary. Press the Up or
Down button to change the Set DHW tank Unoccupied
temperature.
4. Press the Item button to locate the Set DHW tank Away
temperature if necessary. Press the Up or Down button
to change the Set DHW tank Away temperature.