Reloop CONTOUR INTERFACE EDITION - Manual (Page 33)

ENGLI
sh
33
T6 Deck Assignment Buttons
By pressing one of the buttons the current
deck can be determined. The LEDs change
accordingly.
NOTE!
Only decks A & B can be used in Traktor
LE.
Deck Cue Buttons
By using one of the cue buttons the monitoring
function for the current deck will be activated.
NOTE!
Only the first two buttons are available for
Traktor LE.
T7 Dry/Wet Fine Adjustment
Via the encoder the effect‘s intensitsy
can be adjusted. Effect Change
If the Advanced Effect section is selected, the
effect can be changed by turning the encoder.
T8 Dry/Wet Fader
Hereby the effect‘s intensity can be
changed quickly. headphones volume
The fader changes the headphones‘ volume.
Only available in stand alone mode.
T9 Effect Parameter
In Advanced Effect Mode the parameters
can be changed herewith.
Dry/Wet Fine Adjustment
If Chained Effect Mode is used, the single
effects can be controlled via the encoder.
NOTE!
In Traktor LE only the first parameter
is available in Chained Effect Mode.
Effect Change
Hereby the relative effect can be changed in
Chained Effect Mode.
NOTE!
In Traktor LE only the first effect section‘s
effect is available.
Equalizer Kill Function
Pressing the encoder activates/deactivates
the equalizer‘s kill function. The first encoder
from the left of this section filters the high
frequencies, the second encoder filters the
mid frequencies and the third encoder filters
the low frequencies.
T10 Effect Parameter
In Advanced Effect Mode the parameters
can be changed quickly hereby.
Dry/Wet Fader
If Chained Effect Mode is used the single
effects can be controlled via the faders.
NOTE!
In Traktor LE in Chained Effect Mode
only the first parameter is available.
Equalizer Controller
By moving the fader the equalizer‘s parame-
ters can be adjusted. The first fader from the
left controls the high frequencies, the second
fader controls the mid frequencies and the
third fader controlls the low frequencies that
are audible in the following.
T11 FX On Button
Activates the Advanced FX Section cor-
responding to the deck. (Deck A --> FX1,
Deck B --> FX2, Deck C --> FX3, Deck D
--> FX4)
T12 Effect Reset Function
In Advanced Effect Mode the effect can
be reset hereby.
FX 1 On
Activates/deactivates the first effect in
Chained Effect Mode.
T13 Effect Button 1
Activates/deactivates the Effect Button
1 in Advanced Effect Mode.
FX 2 On
Activates/deactivates the second effect
in Chained Effect Mode.
T14 Effect Button 2
Activates/deactivates the Effect Button
2 in Advanced Effect Mode.
FX 3 On
Activates/deactivates the third effect in
Chained Effect Mode.
T15 Loop Length
By turning the encoder varies the set
loop‘s length.
By pressing the encoder the Loop Acti-
ve function is activated/deactivated. Fine Pitch Controller
Herewith the current deck‘s pitch fader can be
adjusted exactly.