Operation, Engli sh – Reloop CONTOUR INTERFACE EDITION User Manual

Page 32

ENGLI

If several Contour devices are in use, the various in- and out-ports for the different channels have
to be divided among the devices.

Example: For 2 Contours the device entries should be manipulated as follows:

4. OPERATION

After connecting and configuring Reloop Contour correctly for the DJ software, Traktor can now be
used. If Traktor Pro is used it is possible to fully exploit the Contour user interface. There are some
differences for Traktor LE regarding effect control, the number of usable decks and the hot cue
assignment.

NOTE!
In the following the whole Traktor function assignment will be described. some features are only
available in Traktor Pro and therefore they have been marked grey in the following chart.

Device

In-Port

Out-Port

Contour V* (CH1)

Reloop CONTOUR

Contour V* (CH2)

Reloop CONTOUR

Contour V* (CH3)

Reloop CONTOUR

Contour V* (CH4)

Reloop CONTOUR

Contour V* (Master) All ports

None

Device

In-Port

Out-Port

Contour V* (CH1)

Reloop CONTOUR

Contour V* (CH2)

Reloop CONTOUR2

Contour V* (CH3)

Reloop CONTOUR

Contour V* (CH4)

Reloop CONTOUR2

Contour V* (Master) All ports

None

ELEMENT FUNCTION

FUNCTION WITh ACTIvATED shIFT -T29-

FX 1 Routing Button
Hereby the FX 1 unit can be assigned to the
current deck (see -T6-).

Master Deck Assignment
The current deck becomes the master deck.

FX 2 Routing Button
Hereby the FX2 unit can be assigned to
the current deck (see -T6-).

sNAP Function
Via this function it is possible to arrange the
set cue points and loops at the grid.

FX 3 Routing Button
Hereby the FX 3 unit can be assigned
to the current deck (see -T6-).

Quantize Function
Triggerd hot cues are geared to the master
deck‘s beat. Convenient for real-time mixing.

FX 4 Routing Button
Hereby the FX 4 unit can be assigned to the
current deck (see -T6-).

LFO Reset Function
Sets back all LFO-based effects.

Tracklist Navigation
- By turning the encoder you can scroll
through the track directory.
- By pressing the encoder you can load
the selected track to the current deck.

Folder Navigation
- By turning the encoder you can navigate the
folder direcotry.
- By pressing the encoder you can open/close
the selected direcotry.