E-flite J-3 Cub 25 ARF - Manual (Page 8)

Landing Gear Installation
Required Parts
• Fuselage • Landing gear
• Hub cap (2) • Tie wrap (6)
• Inner wheel hub (2) • Outer wheel hub (2)
• 4mm wheel collar (2) • 3mm setscrew (2)
• Landing gear strap (4)
• Landing gear fairing (2)
• 2
1 /
2
" (63mm) foam wheel (2)
• 2mm x 15mm sheet metal screw (8)
• 2mm x 10mm sheet metal screw (8)
Required Tools and Adhesives
• Phillips screwdriver • Hex wrench (included in kit)
• Side cutter
Note:.The.fuselage.is.designed.to.accept.either.
the.standard.landing.gear.or.optional.floats..
Changing.from.landing.gear.to.floats.requires.
less.than.5.minutes..Refer.to.the.manual.
included.with.your.floats.for.proper.installation.
Non-Warranty Repairs
Should your repair not be covered by warranty and the
expense exceeds 50% of the retail purchase cost, you will
be provided with an estimate advising you of your options.
You will be billed for any return freight for non-warranty
repairs. Please advise us of your preferred method of
payment. Horizon Hobby accepts money orders and cashiers
checks, as well as Visa, MasterCard, American Express,
and Discover cards. If you choose to pay by credit card,
please include your credit card number and expiration date.
Any repair left unpaid or unclaimed after 90 days will be
considered abandoned and will be disposed of accordingly.
Electronics and engines requiring inspection or repair should
be shipped to the following address (freight prepaid):
Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822
All other products requiring inspection or repair should
be shipped to the following address (freight prepaid):
Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822
8