E-flite J-3 Cub 25 ARF - Manual (Page 44)

Final Assembly
Required Parts
• Fuselage • Wing
• Front windshield • Side window (right and left)
• Wing strut (right and left)
• 2mm x 10mm sheet metal screws (6)
Required Tools and Adhesives
• Phillips screwdriver • Hobby scissors
• Felt-tipped pen • Sandpaper
• Canopy glue • Masking tape
 1. Place the front windshield onto the fuselage. Trace
around the windscreen using a felt-tipped pen.
 2. Lightly sand the fuselage inside the line drawn
in the last step. Also sand the inside edge of the
windshield where it will attach to the fuselage.
Note:.You.can.also.remove.a.1/8".(3mm)..
strip.of.covering.inside.the.line..The.bare..
wood.will.provide.a.better.gluing.surface.than.
the.covering.
44