Wing assembly, Wing.assembly – E-flite J-3 Cub 25 ARF User Manual

Page 18

background image

Wing Assembly

Required Parts

• Clevis (2)

• Clevis retainer (2)

• Pushrod wire keeper (2) • CA hinge (6)

• Mini Servo (2)

• 6" servo extension(2)

• Cub yellow covering strip

• Wing panel (left and right)

• Aileron (left and right)

• Plywood wing joiner (2)

• Aileron servo cover (left and right)

• 3/4" x 3/8" x 3/8"

(19mm x 10mm x 10mm) servo block (4)

• Control horn w/backplate (2)

• 2mm x 20mm screw (4)

• 2mm x 10mm sheet metal screw (8)

• 4" (100mm) linkage wire (2)

• Long Servo Arm (JRPA212) (2)

Required Tools and Adhesives

• 6-minute epoxy

• Phillips screwdriver

• Thin CA

• T-pins

• Drill

• Felt-tipped pen

• 30-minute epoxy

• Drill bit: 1/16" (1.5mm), 5/64" (2mm)

• String

• Masking tape





1. Place a T-pin in the center of three hinges.

18