E-flite J-3 Cub 25 ARF - Manual (Page 30)

 25. Use a covering iron to apply the covering to the
center of the wing over the joint.
Tail Installation
Required Parts
• Fuselage • Assembled wing
• 8-32 x 1 1 /
8
" screw (2) • #8 washer (2)
• Stabilizer w/elevators • Rudder w/fin
Required Tools and Adhesives
• Phillips screwdriver • Felt-tipped pen
• 6-minute epoxy • Paper towels
• Rubbing alcohol • Square
• Hobby knife • Ruler
 1. Attach the wing using two #8 washers and two
8-32 x 1 1
/
8
" bolts.
30