Radio installation, Radio.installation – E-flite J-3 Cub 25 ARF User Manual

Page 16

Note:.The.servo.openings.in.the.fuselage.are.

set.up.for.the.JR.SPORT

.(MN48).Mini.Servos.



2. Center the servo in the servo opening. Use a

1/16" (1.5mm) drill bit to drill the locations for
the servo mounting screws.

Radio Installation

Required Parts

• Fuselage

• Receiver

• Mini Servo (2)

• 6" Y-harness

Required Tools and Adhesives

• Drill

• Drill bit: 1/16" (1.5mm)



1. Install the servo grommets and brass eyelets

on the rudder and elevator servos following
the instructions provided with the servos or
radio system.