E-flite Cessna 150 Aerobat 250 ARF - Manual (Page 24)

24 E-flite Cessna 150 Aerobat 250 ARF Assembly Manual
 2. Slide the carbon fiber wing tube into the socket
in the wing panel. The tube socket has a cap on it,
so do not force the tube in any farther than it will
easily slide.
 3. Slide the carbon fiber wing tube into the
fuselage. Connect the aileron extension to the
extension in the fuselage. Guide the aileron
extension into the wing. The wing panel will fit tight
against the fuselage as shown.
 4. Slide the wing so it fits tightly against
the fuselage.
 5. Place the remaining wing panel into position.
 6. Fit the wing strut to the fitting at the fuselage. The
ends are pre-bent to align the struts to the wing. If
the strut angles forward, reposition the strut so it
aligns with the fitting on the wing. It is not necessary
to change the bend in the strut.
 7. Slide the strut in the fitting at the wing.
 8. Repeat steps 6 and 7 to install the remaining
wing strut.