E-flite S.E.5a Slow Flyer 250 ARF - Manual (Page 8)

8 E-flite S.E.5a Slow Flyer ARF Assembly Manual 8 E-flite S.E.5a Slow Flyer ARF Assembly Manual
 2. Attach the speed control inside the fuselage using
two-sided tape. Route the wires for the motor, battery
and servo connections as shown.
 3. Locate the 1 1 /
2
-inch (38mm) motor tube. Follow the
instructions included with the motor to glue (using RTV
silicone) the motor to the motor tube. Be careful not to get
glue inside the motor bearing.
 4. Lightly sand the motor tube once the adhesive used to
glue the motor to the motor tube has fully cured.