E-flite S.E.5a Slow Flyer 250 ARF - Manual (Page 19)

19 E-flite S.E.5a Slow Flyer ARF Assembly Manual
 2. Slide the pushrod wire into the pushrod tube located in
front of the elevator control horn.
 3. The pushrod wire will exit the pushrod tube inside
the fuselage and then pass through the connector on
the servo.
 4. Slide the elevator pushrod wire through the center hole
in the control horn. Place a small bend in the pushrod
wire to apply light tension to keep the pushrod wire from
popping out of the horn.