E-flite S.E.5a Slow Flyer 250 ARF User Manual

Page 14

E-flite S.E.5a Slow Flyer ARF Assembly Manual



2. Position and center the bottom wing on the

fuselage. Use a felt-tipped pen to mark the location for

ONE of the wing mounting screws at this time.



3. Use a pin drill and 1/16-inch (1.5mm) drill bit to

drill a hole for the wing mounting screw marked in the

previous step.



4. Use a #2 x 5/8-inch sheet metal screw and #1

Phillips screwdriver to temporarily attach the wing to the

fuselage. Using one screw will allow you to align the

bottom wing as described in the following steps.