E-flite S.E.5a Slow Flyer 250 ARF - Manual (Page 28)

28 E-flite S.E.5a Slow Flyer ARF Assembly Manual
Machine Gun Installation
Required Parts
Completed airframe
Machine gun
Required Tools and Adhesives
Foam-safe CA
 1. Using foam-safe CA, install the machine gun on the
top wing. The tabs on the gun will align with the slots in
the top wing.
Control Throws
 1. Turn on the transmitter and receiver of your aircraft.
Check the movement of the rudder using the transmitter.
When the stick is moved right, the rudder should also
move right. Reverse the direction of the servo at the
transmitter if necessary.
 2. Check the movement of the elevator with the radio
system. Moving the elevator stick down will make the
airplane elevator move up.
Elevator
3/4-inch (19mm) up/down
Rudder
1 1 /
2
-inch (38mm) left/right