E-flite S.E.5a Slow Flyer 250 ARF - Manual (Page 21)

21 E-flite S.E.5a Slow Flyer ARF Assembly Manual
Landing Gear Installation
Required Parts
• Airframe • Landing gear
• Wheel (2) • Wheel retainer (2)
Required Tools and Adhesives
• Foam-safe CA Hobby knife
 1. Slide a wheel onto the axle. Use a wheel retainer to
secure the wheel.
Hint: Use medium foam-safe CA on the retainer if it
is not snug on the axle. Use care not to glue the wheel
to the axle.
 2. Slide the front of the gear into the slot at the leading
edge of the wing.
 3. Use a hobby knife to complete cutting the slot for the
rear of the gear. Slide the rear of the gear in the slot
behind the trailing edge of the wing.